Flea
Input Selection
Use the Input Selection function to select between the component input and the
1- | Press |
|
|
| to access the menu. |
|
|
| |||
|
|
| |||
2- | Press the Up or Down keys to move through the menu and access the Input | ||||
| Selection command. |
Operating Flea
|
|
|
|
| Input Selection | Component |
|
|
|
|
|
|
|
|
|
| Input Selection |
| |
|
|
|
|
3- Press to change the selected input. You will get a checker board pattern if no video signal is present at the selected input.
4- The menu will disappear by itself after a few seconds.
Status
Use the status parameter to display the firmware version of the Flea and other complementary information.
1- | Press |
|
|
|
| to access the menu. | ||
|
|
|
| |||||
|
|
|
| |||||
2- | Press the Up or Down keys to move through the menu and access the Status | |||||||
| command. |
|
| |||||
|
|
|
|
|
| |||
| Status |
| off |
| ||||
3- | Press | to set Status to on. | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| STATUS |
|
|
| Input Selection | 1 |
| |||||
| Input Video Format | 720p60 |
| |||||
| Color Space | YBR422 |
| |||||
| Revision Number | 2.01 |
| |||||
| Serial Number |
| ||||||
4- | The menu will disappear by itself after a few seconds. |
11