Technical data about this product | Alice & Law KX-FL501AL guide

			Specifications
	Technical data about this product!
Applicable Lines:		Public Switched Telephone Network
Document Size:		Max. 216 mm in width / Max. 600 mm in length
Effective Scanning Width:		208 mm
Recording Paper Size:		A4: 210 mm x 297 mm
Effective Printing Width:		202 mm
Transmission Time*:		Approx. 8 s/page (ECM-MMR)**
Scanning Density:		Horizontal: 8 pels/mm
		Vertical: 3.85 lines/mm –STANDARD
		7.7 lines/mm –FINE/PHOTO/PHOTO WITH TEXT
		15.4 lines/mm –SUPER FINE
Halftone Level:		64-level
Scanner Type:		Contact Image Sensor (CIS)
Printer Type:		Laser Beam Printer
Data Compression System: Modified Huffman (MH), Modified READ (MR),
		Modified Modified READ (MMR)
Modem Speed:		14,400 / 12,000 / 9,600 / 7,200 / 4,800 / 2,400 bps; Automatic Fallback
Operating Environment:		10 °C – 32.5 °C (50 °F – 90.5 °F), 20 % – 80 % RH (Relative Humidity)
Dimensions (H x W x D):		190 mm x 417 mm x 345 mm
Mass (Weight):		Approx. 6.5 kg
Power Consumption:		Standby:	Approx. 7 W
		Transmission:	Approx. 25 W
		Reception:	Approx. 200 W
		Copy:	Approx. 200 W
		Maximum:	Approx. 560 W (When the fuser unit turns on)
Power Supply:		220–240 V AC, 50/60 Hz
Memory Capacity:		Fax memory: Approx. 120 pages of memory transmission
		Approx. 170 pages of memory reception
		(Based on the ITU-T No. 1 Test Chart in standard
		resolution.)
Laser diode properties:		Laser output: Max. 5 mW
		Wave length: 760 nm – 800 nm
		Emission duration: Continuous
Print Speed:		10 ppm (pages per minute)
Printing Resolution:		600 x 600 dpi

ITU-T No. 1 Test Chart

** Transmission speed depends upon the contents of the pages, resolution, telephone line conditions and capability of the other party’s machine.

**Transmission speed is based upon the ITU-T No. 1 Test Chart and original mode.

If the capability of the other party’s machine is inferior to your unit, the transmission time may be longer.

79

Image 79

Alice & Law KX-FL501AL, KX-FL501NZ manual Technical data about this product

Contents

KX-FL501NZ For your future reference Thank you for purchasing a Panasonic facsimile For Australian users Service difficulties InstallationImportant information for Australian users Important safety instructions Safety instructions Drum unit Laser radiationFuser unit Toner cartridge Other Information Table of Contents Copy Model No Usage Specifications AccessoriesIncluded accessories Accessory information Easy Dial Help ButtonHelp function Help Speaker Paper tray Left side of the unit Finding the ControlsOverview Document guides Handset ONE-TOUCH Dial Location Toner cartridge and drum unit SetupSurface Toner save feature Paper stacker Paper tray, document stacker and paper stackerPaper tray Document stacker Adding paper Recording paper KX-FL501AL users Connect to Line ConnectionsKX-FL501NZ users To the single Menu Easy Dial SET Stop Setting the date and timeDate and time, your logo and facsimile telephone number Menu Menu Recall Easy Dial SET Setting your logoHandset Mute To select characters with the dial keypad To select characters using Easy DialDisplay order of characters To correct a mistake To delete a number Setting your facsimile telephone number Handset receiver volume VolumesAdjusting volumes Ringer volume Directory Program Automatic DiallingStoring names and telephone numbers in ONE-TOUCH Dial Recall Storing names and telephone numbers in Easy Dial Editing a stored name and number Editing and erasing a stored name and number Easy Dial SET Directory Program Stop Erasing a stored station and item Lower Dial NAME/TEL NO. Stop Monitor Making a voice call using ONE-TOUCH Dial and Easy DialUsing ONE-TOUCH Dial Using Easy Dial Caller ID Caller ID service from your phone companyHow Caller ID is displayed Display while viewing Viewing and calling back using caller informationCaller ID Search Monitor NAME/TEL no Caller ID Print Stop SET Confirming caller information using the Caller ID listPrinting and erasing the Caller ID list Sample of a Caller ID list For Easy Dial Rotate Easy Dial Storing caller information in ONE-TOUCH Dial and Easy DialEasy Dial Lower SET Caller ID Search Press Monitor Voice ContactInitiating voice contact Receiving a request for voice contact FAX Start ResolutionSending Faxes Sending a fax manually Easy Dial Stop Resolution Lower ONE-TOUCH Dial FAX Start Sending a fax using ONE-TOUCH Dial Maximum size Effective scanning area Document weightDocuments you can send Minimum size Sample of a sending report Reports for confirmationSending report Journal report Broadcast ONE-TOUCH Broadcast transmissionProgramming the stations Manual Broad Easy Dial SET Directory Program Adding a new station Erasing a stored station Sending the same document to pre-programmed parties Easy Dial Stop Resolution FAX Start SETManual Broad Broadcast Receiving Faxes Setting the unit to receive faxes Remote Fax activation With a PC Stop FAX Start TEL mode Answering all calls manuallyActivating TEL mode Receiving a fax manually Activating FAX only mode FAX only mode All calls are received as faxes Setting up the fax machine and an answering machine Using the unit with an answering machine Receiving fax calls How the fax machine and answering machine workReceiving a voice message and fax document in one call Receiving voice calls Silent fax recognition ring count TEL/FAX delayed ring count Voice callTo set TEL/FAX mode Call is received TEL/FAX delayed ring count When an extension telephone is connected Extension telephone Using with an answering machine and computer Menu SET Turning the Auto Answer mode on remotelyTo switch to the FAX only mode To switch to the TEL/FAX mode Setting the ring pattern detection Distinctive ring service Menu Monitor Easy Dial SET REDIAL/PAUSE Pager call when the unit receives a faxWhen your pager receives a pager call Display Making a copy To select the resolution according to the type of documentCopy Start Stop Collate Resolution Copy Zoom Copying To collate multiple copies To reduce or enlarge a document Programming Features SummaryGeneral programming method OFF Basic featuresError Programming table Bell How to set menu optionsTone #13 #25 Advanced features#22 #23 Normal #58 #44#46 #49 FAX only Communication message Error Cause & solution Code Error MessagesReports Display Display message Cause & solution Error Messages Operations Document are distorted or not Problem Cause & solution Other party complains thatProblem Cause & solution Cannot receive documents Letters on their received Auto Answer to turn on Problem Cause & solution Cannot select the desiredReceive mode Problem Cause & solution If a power failure occurs Do not touch it ReplacementReplacing the toner cartridge and the drum unit Fuser unit gets hot Green drum surface Jams When the recording paper has jammed in the unitRecording paper jam When the recording paper was not fed into the unit properly Document jams sending No feeding or multiple feeding occurs while sending Cleaning the inside of the unit Cleaning Remove the drum and toner unit by Reference lists and reports Printed ReportsEasy Dial SET Stop Technical data about this product Toner life for KX-FA76A SpecificationsToner life Drum life Index Index Index Page PFQX1502ZA WM0101NK0