033 033
/
CHAPTER 4: USING YOUR DESKTOP
Advance DRAM Conguration Submenu
Memory-Z Opens submenu to display the SPD
conguration for each memory
module.
Advanced Memory Settings Allows you to toggle to Manual mode
and set all of the timing parameters.
tCL Displays the Column Address Strobe
Latency (editable in Manual Mode).
tRCD Displays timing of RAS to CAS delay
(editable in Manual Mode).
tRP Displays timing of RAS Precharge
(editable in Manual Mode).
tRAS Displays timing of Row Address Strobe
(editable in Manual Mode).
tRFC Displays timing of Refresh to Archive/
Refresh cycle time (editable in Manual
Mode).
tWR Displays timing of Write Recover
(editable in Manual Mode).
tWTR Displays Write to Read Delay (editable
in Manual Mode).
tRRD Displays RAS to RAS delay (editable in
Manual Mode).
Advance DRAM Conguration Submenu
tRTP Displays Read to Precharge Command
Delay (editable in Manual Mode).
1T/2T Timing Displays the Command Rate (editable
in Manual Mode).
Overclock Conguration Submenu
Adjust CPU BClk (MHz) Allows you to adjust BClk of processor.
Spread Spectrum Enable/Disable Spread Spectrum
Modulation.
Adjust PCI Frequency (MHz) Allows you to adjust PCI Frequency.
Adjust PCI-E Frequency (MHz) Allows you to adjust PCI-E Frequency.
Intel® Turbo Mode tech If enabled, allows processor to run at
faster frequencies than marked.
[1-4] Core CPU Turbo Ratio
Limit Limit ratio for cores 1-4.
Turbo Mode TDC Limit
Override Allows you to program the current
thresholds for the processor while in
turbo mode.
Turbo Mode TDP Limit
Override Allows you to program the power
thresholds for the processor while in
turbo mode.