FILTER ASSEMBLY- 600 D, DX
Step 1
Turn Power Off and unplug receptacle.
Lay unit upside down.
Step 4
Remove only one of the white, felt,
Step 2
With a #2 Philips screw driver, remove the four screws from the bottom of the unit.
Step 5
Insert the carbon filter (either a Model 600 D Carbon or a Model 600 DX Carbon) into the unit.
Step 3
Gently grasp wheels.
Remove base by gently pulling on the wheels.
Step 6
Replace the gasket that had been removed in STEP 4.
Step 7
Place lid back to its proper position by aligning the arrow with the rear seam.
Step 8
Replace the four screws
Step 9
Turn the unit back onto its wheels. It is now ready for immediate use.
Model 600 Series
Operation and Maintenance Manual
AllerAir Industries Inc. Toll free:
