Installing the Dryer . . .

STEP 1:

Position and Level

the Dryer

For further assistance refer to Section on Location Requirements.

Install dryer before washer. This allows room for attaching exhaust duct.

Install the four rubber cups found in the accessory bag.

Place the dryer in position, and adjust the legs until the dryer is level.

STEP 2:

Connect Dryer Exhaust System

For further assistance refer to Sections on Location Requirements and Dryer Exhaust Requirements.

WARNING

A clothes dryer produces combustible lint. To reduce the risk of fire and combustion gas accumulation the dryer MUST be exhausted to the outdoors.

W116

•DO NOT use plastic or thin foil flexible ducting.

•Locate dryer so exhaust duct is as short as possible.

•Be certain old ducts are cleaned before installing your new dryer.

•Use 10.2 cm (4") diameter rigid or flexible metal duct.

•Use as few elbows as possible.

•Use duct tape on all joints.

•Failure to exhaust dryer properly will void warranty.

LEVEL

DRYER

BASE

LEVELING

LEG

RUBBER

CUPD334IE1A

D333IE1A

D335IE1A

DO DON’T

NOTE: Venting materials are not supplied with the dryer (obtain locally).

IMPORTANT: DO NOT block the airflow at the bottom of the dryer’s front panel with laundry, rugs, etc. Blockage will decrease airflow through the dryer, thus reducing the efficiency of the dryer.

504523

11