Before You Start . . .

Tools

For most installations, the basic tools you will need are:

WRENCH

SCREWDRIVERS

LEVEL

DUCT TAPE

TEFLON TAPE

D074IE1F

 

 

 

 

Electrical

•ELECTRIC DRYER

Dryer needs a 3 wire and ground, 120/240 or 120/208 Volt, 30Amp., 60 Hertz, AC single Phase electrical supply.

•GAS DRYER

Dryer needs a 120 Volt, 15 Amp., 60 Hertz, polarized 3-slot effectively grounded receptacle.

NOTE: For more detailed information, refer to Section on Electrical Requirements.

Gas

Dryer is equipped for Natural Gas with a 3/8"NPT gas supply connection. For more detailed information, refer to Section on Gas Requirements.

Location

Place the dryer on a solid floor with an adequate air supply. For more detailed information, refer to Section on Location Requirements.

Exhaust

Use rigid metal duct and exhaust the dryer to the outside by the shortest route possible.

D333I

NOTE: For more detailed information, refer to Section on Dryer Exhaust Requirements.

10

504523