Meter Case . . .
(Metered Models)
The factory mounted coin meter case does not include the service door lock, coin drawer, coin drawer lock and keys. These parts must be ordered (at extra cost) according to the purchaser’s requirements direct from the manufacturer of your choice.
NOTE: You have the option of using a screw type lock or a 1/4 turn lock on the meter case service door. If you choose to use a screw lock, then the special bracket (located inside the meter case) must be used. DO NOT use the special bracket if a 1/4 turn lock is used.
Coin Drawer Security — for additional security, drill out the two pilot holes on each front side of the meter case to 1/4 or 5/16 inch (6.4 or 8.0 mm) holes and install a bicycle lock through these holes.
Timer Cams . . .
(Metered Models)
The dryer timer is factory equipped with a 45 minute timing cam. If this drying time is not suitable to your
installation, the following cams can be found in the envelope located in the cylinder:
Electric Dryers | Gas Dryers |
|
A 60 minute timing cam, Part No. 53240, is available for gas dryers as optional equipment at extra cost.
8 | 504523 |