Dryer Exhaust Requirements . . .
WARNING
A clothes dryer produces combustible lint. To reduce the risk of fire and combustion gas accumulation the dryer MUST be exhausted to the outdoors.
W116
This gas appliance contains or produces a chemical or chemicals which can cause death or serious illness and which are known to the State of California to cause cancer, birth defects, or other reproductive harm. To reduce the risk from substances in the fuel or from fuel combustion, make sure this appliance is installed, operated, and maintained according to the instructions in this manual.
W115
To reduce the risk of fire and the accumulation of combustion gases, DO NOT exhaust dryer air into a window well, gas vent, chimney or enclosed, unventilated area, such as an attic, wall, ceiling, crawl space under a building or concealed space of a building.
W045
To reduce the risk of fire, DO NOT use plastic pipe or flexible plastic pipe to exhaust the dryer.
W041
Never install flexible duct in concealed spaces, such as a wall or ceiling.
Exhaust System Materials
Exhaust system materials are not supplied with the dryer.
Exhaust duct must be 10.2 cm (four inches) in diameter having no obstructions. Rigid metal duct is recommended.
DO NOT use sheet metal screws on exhaust pipe joints or other fastening means which extend into the duct that could catch lint and reduce the efficiency of the exhaust system. Secure all joints with duct tape.
|
| MAY BE | |
DESCRIPTION | KIT P/N | OBTAINED | |
|
| LOCALLY | |
|
|
| |
Exhaust Duct (4" Dia.) | Not Available | Yes | |
|
|
| |
Flexible Metal Duct (4" Dia) | 521P3 | Yes | |
|
|
| |
Weather Hoods, with hinged | Not Available | Yes | |
dampers (4") | |||
|
| ||
|
|
| |
Directional Exhaust Kit | 528P3 | No | |
|
|
| |
Tape | Not Available | Yes | |
|
|
|
NOTE: Kits described above are optional exhaust system materials available at extra cost.
D333IE0B | D335IE0A |
DODON’T
504523 | 21 |