Programming

Cycle and Error Count

The control logs cycle count (total of all cycles completed).

1.To read, enter PROGRAM Mode.

2.Press START (Enter) keypad. Display will show the cycle count.

3.Press START (Enter) keypad. Display will show certain error conditions that may have been recorded by the control.

4.Press START (Enter) keypad. Display will show drain error conditions (“Erdn”) that may have been recorded by the control.

5.Press START (Enter) keypad. Display will show fill error conditions (“ErFL”) that may have been recorded by the control.

6.Read the information when consulting technical assistance as needed.

7.Step through the error log by pressing START (Enter) keypad repeatedly until display reverts to normal PROGRAM Mode (“0000” or a temperature).

F232179

© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT

9