Preliminary Information

About the Control

WE-8 B-control on the washer-extractor is an advanced, programmable computer that allows the owner to create wash programs.

The control is factory set-up with 8 pre-programmed cycles and is ready for operation. Refer to Pre-Programmed Cycles section in the Programming manual.

WE-8 B-control allows the owner to program custom cycles on the machine or with a PC and the Alliance planner software.

IMPORTANT: In the event of a power failure, WE- 8 B-control will not have to be reprogrammed. It is designed with a memory system that will remember how it was programmed until the electrical power is restored.

Power Failure Recovery

If a cycle in process and the power fails, the user has one minute to press START (enter) to continue the cycle. If START (enter) is not pressed within the minute, program will drain water and basket will not rotate (safe mode). Control will test speed sensor by steering the wash speed for a brief time. When no speed is detected, control will proceed as if the speed detector failed and the machine cannot be opened until the three minute power failure wait period is done.

9001910

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

9