
Operating Instructions
1.Turn on main power source (circuit breaker).
2.Pull the door handle towards you to open the door. Some models may have a door handle with a button that must be pressed.
3.Load to capacity whenever possible. DO NOT OVERLOAD. Refer to Figure 4.
NOTE: Underloading can cause
Operation
NORMAL PERM PRESS
WASH | HOT | WARM | |
ADD | NORMAL | PERM PRESS | |
BLEACH | |||
|
| ||
RINSE | WARM | COLD | |
| |||
SPIN | QUICK WASH | QUICK WASH | |
| |||
DOOR | START |
| |
| HOT | WARM | |
| HEAVY SOIL | DELICATE | |
| HOT | COLD |
DOMESTIC MODELS
CHM482R
CHM482R
95C | 95C |
60C | 60C |
40C | 40C |
| 30C |
< | < |
CFD53N
CFD53N
INTERNATIONAL MODELS
Figure 5
CHM488R
CHM488R
Figure 4
4.Close door by pushing door handle towards machine.
5.The default wash cycle will display.
NOTE: Perm Press Cold is the default cycle for coin models if none is selected.
6.If desired, select a different cycle at this point or after satisfying vend. The LED indicator for that cycle will light.
9001910 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 11 |