| Operation | |
| Table 1 (Continued) | |
|
| |
Display | Meaning | |
|
| |
___F | The first 3 digits are reserved for temperature reading, F indicates “degrees Fahrenheit” | |
|
| |
FILL | “Fill error” – machine did not fill to programmed water level within 10 minutes | |
|
| |
dOOr | “Door” opened during cycle | |
|
| |
SHUt/door | Machine user must “shut door” of the washer to allow the cycle to begin | |
|
| |
CAnt/OPEn | Control cannot unlock the door | |
|
| |
CArd | Control will interpret the coin 2 input as a START signal from a Card Reader with no timing | |
max restriction, meaning the signal can last any amount of time once recognized | ||
| ||
|
| |
USH1 | “Wash 1” segment | |
|
| |
USH2 | “Wash 2” segment | |
|
| |
USH3 | “Wash 3” segment | |
|
| |
USH4 | “Wash 4” segment | |
|
| |
rIn1 | “Rinse 1” segment | |
|
| |
rIn2 | “Rinse 2” segment | |
|
| |
rIn3 | “Rinse 3” segment | |
|
| |
rIn4 | “Rinse 4” segment (final rinse) | |
|
| |
dOnE | Cycle has concluded | |
|
| |
drAI | Drain selected for segment; also indicates in drain step during 2 speed version test cycle | |
|
| |
Flashes for a period of time (for safety) after power up while keeping outputs OFF | ||
|
| |
dEn1 | Denomination assigned for coin 1 input (example: .25 would mean a US quarter) | |
|
| |
dEn2 | Denomination assigned for coin 2 input (example: 100 would mean a US dollar) | |
|
|
Table 1
F232215 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 11 |