Maintenance

1

2

H047I

1Bearing Grease Fitting

2Seal Grease Fitting

Figure 11

3.Lubricate bearings and seals each month OR after every 200 hours of operation. Refer to Figure 11.

a.Use a premium-grade lithium-based #2 grease. Never mix two types of grease, such as petroleum and silicone.

b. Pump the grease gun slowly, permitting only the following number of strokes:

●Bearing grease fitting, 2 strokes

●Seal grease fitting, 1 stroke

IMPORTANT: Do not pump the grease gun until grease comes out of the bearing housing. This can result in overlubrication, causing damage to bearings and seals.

F232215

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

17