10 | Features in | Patch Release Note |
Table 2: Patch file details for Patch
Base Software Release File | |
|
|
GUI Resource File Names | d440Se14.rsc (AR440S) |
| d441Se14.rsc (AR441S) |
|
|
Patch Release Date | |
|
|
Compressed Patch File Name | |
|
|
Compressed Patch File Size | 161304 bytes |
|
|
Patch 54266-01 includes the following enhancements and resolved issues:
PCR: 40563 | Module: ADSL |
This patch, together with the base software release, supports the AR441S ADSL (Annex B) router. With this patch, the AR440S ADSL port operates in Annex A mode for ADSL over POTS, and the AR441S ADSL port operates in Annex B mode for ADSL over ISDN. (“AR441S ADSL Router Hardware Platform” on page 8)
PCR: 40568 Module: SWKLevel: 3
If the Jabber counter in the output of the show switch port counter command had more than four digits, it displayed an incorrect value. This issue has been resolved.
PCR: 40572 | Module: M8272 | Level: 3 |
An AR023 synchronous port interface card (PIC) installed in an AR440S failed the Test facility interface test, even when there was nothing wrong with the PIC. This issue has been resolved.
PCR: 40576 | Module: Firewall | Level: 2 |
When the firewall was creating new NAT entries under extremely heavy loads, it occasionally caused a fatal error. This issue has been resolved.
PCR: 40581 Module: BRG | Level: 2 |
The router could not bridge between an ATM channel and a VLAN interface. This issue has been resolved.
PCR: 40582 Module: BRG | Level: 2 |
Occasionally a reboot occurred when the router attempted to bridge traffic to an ATM channel before the channel had come up for the first time. This issue has been resolved.
PCR: 40585 | Module: IPG | Level: 2 |
Attaching an IP interface to a VCMux encapsulated ATM interface with
Inverse ARP disabled by using the command:
add ip interface=atm0.1 ipaddress=192.168.1.1 inversearp=off
failed, giving one of the messages:
Error (3005271): Internal Error: Failed to start interface
Patch
