Patch | 7 |
PCR: 40417 | Module: OSPF | Level: 3 |
When LS Acks (Link State Advert acks) were received, they were compared against the transmitted LSA (Link State Advert). If it was the same, the LSA was removed from the
13.1of RFC2328, to determine if the LS Ack received is the instance as the LSA.
PCR: 40428 | Module: IP, FILTER | Level: 3 |
If the value specified for the sport or dport parameter in the add ip filter or set ip filter commands was 65535, then the IP filter process would incorrectly interpret that value as meaning “any “ port. This issue has been resolved so that port 65535 is now used for the IP filter when specified.
PCR: 40437 Module: CORE | Level: 3 |
The tick timer was not initialised correctly, which could cause firewall sessions to time out prematurely when the system time reached midnight. This issue has been resolved.
PCR: 40493 Module: DHCP | Level: 3 |
In certain scenarios when acting as a DHCP server, the switch would send a DHCP ACK to an invalid MAC address. This issue has been resolved.
PCR: 40498 | Module: OSPF | Level: 3 |
When a virtual link end point is no longer reachable, the virtual interface is not brought down, and the virtual neighbour is not removed. This issue has been resolved.
PCR: 40513 | Module: PIM6 | Level: 3 |
The RP Candidate address was not displayed correctly when issuing the "show pim6 rps" command. This issue has been resolved.
PCR: 40610 | Module: BRIDGE | Level: 3 |
When the set bridge port command was executed, the bridge configuration resulting from the create config or show config dynamic=bridge commands would be incorrect. This issue has been resolved.
PCR: 40676 Module: ADSL, CORE | Level: 3 |
The ADSL interface, adsl0, did not appear in the Interface Name Summary table section of the show interface command output or in the arInterfaceTable in the Allied Telesyn enterprise MIB. This issue has been resolved.
Patch
