Allied Telesis AR450S Electrical Notices, Lightning Danger, Installation and Safety Guide

Installation and Safety Guide 39

Safety

WARNING: In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

ELECTRICAL NOTICES

WARNING: ELECTRIC SHOCK HAZARD

To prevent ELECTRIC shock, do not remove the cover. No user-serviceable parts inside. This unit contains HAZARDOUS VOLTAGES and should only be opened by a trained and qualified technician.

LIGHTNING DANGER

DANGER: DO NOT WORK on equipment or CABLES during periods of

LIGHTNING ACTIVITY.

CAUTION: POWER CORD IS USED AS A DISCONNECTION DEVICE. TO DE-ENERGIZE EQUIPMENT, disconnect the power cord.

ELECTRICAL - TYPE CLASS 1 EQUIPMENT

THIS EQUIPMENT MUST BE EARTHED. Power plug must be connected to a properly wired earth ground socket outlet. An improperly wired socket outlet could place hazardous validates on accessible metal parts.

PLUGGABLE EQUIPMENT, the socket outlet shall be installed near the equipment and shall be easily accessible.

CAUTION: Air vents must not be blocked and must have free access to the room ambient air for cooling.

OPERATING TEMPERATURE: AR415S, AR450S: This product is designed for a maximum ambient temperature of 40 degrees C.

AR440S, AR441S, AR442S: This product is designed for a maximum ambient temperature of 50 degrees C.

ALL COUNTRIES: Install product in accordance with local and National Electrical Codes.

ELECTRICAL - AC MAINS CIRCUIT OVERLOADING

When installing product, consideration must be given to the accumulative nameplate ratings when connecting the equipment to the AC supply wiring.

Lithium Battery - Should only be changed by authorised service personnel. CAUTION: Danger of explosion if battery incorrectly replaced. Replace only with Lithium Battery, type CR2032, and dispose of in accordance with the manufacturer’s recommendations and all local codes.

613-000313 Rev D