Chapter 2 - Installing the Switch
34
3. Slide the transceiver into the slot until it clicks into place as shown in
Figure 11.
Figure 11. Inserting the Transceiver
4. Remove the dust plug from a transceiver slot on the switch, as shown
in Figure 12.
Figure 12. Removing the SFP Dust Cap
5. Verify that the handle on the SFP transceiver is in the upright position,
as shown in Figure 12, to prevent inadvertently removing the
transceiver.
6. Repeat this procedure to install another SFP transceiver or go to
“Cabling the Twisted Pair or Fiber Optic Ports” on page 35.
For SFP optical and cabling specifications, consult the documentation
shipped with the module.
A
T
Gig
a
25
26
27
28
25R
26R
27R
28R
PWR
SYS
MODE
SELECT
COL
SPD
DUP
ACT
1456
A
T
Gig
a
25
26
27
28
25R
26R
27R
28R
PWR
SYS
MODE
SELECT
COL
SPD
DUP
ACT
1457