Allied Telesis AT-AR236E manual Quick Start

4.2Quick Start

The first screen (Figure 2) that appears (after the log in screen) is the Quick Start screen. Depending on the country that you reside in, some profiles had been preset for the VPI/VCI and type of encapsulation. For example, if you reside in New Zealand, click on the button for New Zealand and then click Next. The next screen will display the preset profile of VPI=0, VCI=100 and encapsulation type is PPPoA VC-MUX. If this is not correct, select Customise Settings and enter the VPI and VCI settings. If the DSL service is PPPoA or PPPoE, you will also need to enter the username and password which your DSL provider or ISP will supply to you.

The Quick Start page is meant for basic users who only require easy and seamless connectivity to the internet without worrying about any other advance configuration setting.

For more advanced setup, please proceed to the next section.

Important:

After clicking on Connect, please be sure to “Save Settings” to register the username / password or any other changes.

Figure 2 (Quick Start page)

- 8 -