Installing your Adsl Router | Allied Telesis AT-AR236E instruction

3.Installing your ADSL Router

1. Locate an optimum location for the ADSL Router.

2.For connections to the Ethernet and DSL interfaces, please refer to the easy start guide.

3.Connect the AC Power Adapter. Depending upon the type of network, you may want to put the power supply on an uninterruptible supply. Only use the power adapter supplied with the ADSL Router. A different adapter may damage the product.

Now that the hardware installation is complete, proceed to Chapter 4: Setting up your ADSL

Router

- 6 -

Image 6

Allied Telesis AT-AR236E manual Installing your Adsl Router

Contents

Web Interface User’s Guide Wide Area Network connection Local Area Network connection Features Introduction Management Support Your gateway at a glance Ports and buttonsLED description Installing your Adsl Router Setting up your Adsl Router Log into your Adsl Router Quick Start Quick Start Setup for advance user Wide Area Network connectionLocal Area Network connection Configuring the WAN New ConnectionBridged gateway profile and Connection PPPoA Connection Setup Page PPPoE Connection Setup Dhcp Connection Setup Static Connection Setup Page Modem setup Modify an Existing Connection Configuring the LAN Enable/Disable Dhcp Changing the Adsl Router IP address Static IP address assignment Firewall/NAT Services Advanced for advance user only UPnP Port Forwarding DMZ configuration Advanced Security Enable Remote Telnet Access ControlEnable Web from WAN Enable Incoming Icmp Ping MAC Address Filters MAC Filters Multicast Multicast Static Routing Dynamic Routing System Commands ToolsUser Management Update Firmware Ping Test Modem Test Status System Log Appendix a Troubleshooting Adsl Router is not functionalCan’t connect to the Adsl Router DSL Link LED continues to blink but does not go solid DSL Link LED is always off What is a firewall? Adsl Router terms