Installing the Switch

You can install the switch on a table or in a 19-inch rack. To install the switch, perform the following procedure:

1.Remove all components from the shipping package and store the packaging material in a safe location.

Note

You should use the original packaging material if, for any reason, you need to return the unit to Allied Telesyn International.

2.Locate a level, secure surface for the switch.

3.To mount the switch in a rack, do the following:

a.Affix one of the rack-mounting brackets to the side of the switch, as shown in Figure 6.

Figure 6 Installing a Rack-mounting Bracket

b.Install the second bracket on the other side of the switch.

c.Install the switch in a 19-inch rack. (Screws for mounting the switch in the rack are not provided.)