Allied Telesis AT-S101 manual New Features, Operational Notes, Resolved Issue

AT-S101 Version 1.3.0

Management Software for the

AT-GS950/8POE Gigabit Ethernet WebSmart Switch

Software Release Notes

Please read this document before you begin to use the management software.

Supported Platforms

The AT-S101 Version 1.3.0 is supported on the AT-GS950/8POE Gigabit Ethernet WebSmart switch.

Product Documentation

For the AT950/8POE documentation, refer to the following guides:

AT-GS950/8POE Gigabit Ethernet WebSmart Switch Installation Guide AT-S101 Management Software User’s Guide

Both documents are available from the Allied Telesis web site at www.alliedtelesis.com.

What’s New in Version 1.3.0

New Features

None

Operational Notes

The following issue was found in this release:

SFP 100 - Switch over to fiber fails after fiber link is restored. It happens when an AT-SPFX/2 100M SFP transceiver is used when a backup copper link is 1G. Recommended User Workaround: Works fine when the fiber and copper speeds are similar. There are no issues with different SFP models.

Resolved Issue

The IP address can now contain a 255 word within it. Previously, an error message was displayed and an address containing a 255 word was not accepted.

PN 613-001604 Rev A 1