Allied Telesis AT-S101 manual Version 1.2.0 Software Features, Version 1.1.0 Software Features

AT-S101 Version 1.3.0 Software Release Notes

Features History

Version 1.2.0 Software Features

The SNTP (Simple Network Time Protocol) feature has been added.

Version 1.1.0 Software Features

Management access can now be restricted to the default VLAN (VLAN 1). This feature is activated when you select ENABLE for the Management VLAN field on the Tagged VLAN management web page. If this field is set to DISABLED, the management access is available on any VLAN. See the illustration below for the location of this feature.



Version 1.0.0 Software Features

The AT-S101 Version 1.0.0 Management Software supports the following features:

Web-based interface

Dynamic Host Configuration Protocol (DHCP)

Port-based and tagged VLANs

Quality of Service (QoS) support

Port trunking supporting static and LACP (Link Aggregation Control Protocol) port trunks

Port mirroring

Spanning Tree (STP) and Rapid Spanning Tree (RSTP)

IGMP Snooping supporting IGMP versions 1 and 2

Simple Network Management Protocol (SNMP) versions SNMPv1 and SNMPv2c

Bandwidth Control

MAC address table with a storage capacity of 8,000 entries

Static multicast addresses

802.1x Port-based Network Access Control (IEEE 802.1x)

Remote Authentication Dial In User Services (RADIUS) client

PN 613-001604 Rev A 2 Allied Telesis, Inc.