6 | SwitchBlade Chassis and Fan Tray |
Figure1: SwitchBlade rack crossbar.
SwitchBlade Support Bar
5.Remove any packaging and protective material
Inside the chassis: Check that the internal spaces are free of packaging and protective material.
Outside the chassis: Check that all vents are free from obstruction.
6.Insert the blank faceplates (if not factory fitted)
When inserting a faceplate, make sure the faceplate’s metal
Faceplates are mounted vertically in the SwitchBlade 8 chassis
Figure2: Card guides.
bottom card guide
Carefully slide the faceplate into the chassis. The faceplate’s captive screws should line up with the threaded holes on the chassis.