Allied Telesis CG-WLBARGMO user manual Windows XP, Windows Me/ 98

WLBARGMO Manual

<Windows XP/ 2000>

(1)Click [Start] => [Programs] => [Command prompt].

(2)Input [ipconfig] => [Enter].

(3)Confirm IP address (which sould be 192.168.1.x). If the IP is incorrect, please enter 1-byte character as [ipconfig /renew] => Press [Enter].

<Windows Me/ 98/ 95>

(1)Click [Start] => Click [Run].

(2)Input [winipcfg] in the column => press [Enter].

(3)Select your network adapter to display IP address. The IP should be 192.168.1. x ,if none, please click [Release] => Click [Renew].

Q8. How to reboot the product?

A:Reboot to get new setting values applied. The steps are as follows: open the management program-> Click on [Management]-> Click on [Proceed] in the [Reboot] column.

*Note: The definitions of [Reboot], [Firmware update], and [Reset to default settings] are different. Please make sure of your intention before proceeding.

Q9: How to reset to default settings?

A: If you forget the password, get failed in setting or product hang up; you can reset the product’s settings to default values.

(1)Use a spindle item (e.g. a clip) to press [Init button] in the back side of the product until [Status] lights up with red.

(2)After the red light goes out, the system will restore its default values.

48