Allied Telesis SB251-01 manual Availability

Models: SB251-01

1 4
Download 4 pages 57.92 Kb
Page 3
Image 3
Availability

Patch SB251-01 For SwitchBlade 4000 Series Switches and AT-9800 Series Switches

3

The number of user-specified protocols in the PROTOCOL parameter has been increased from three to seven.

The minimum value of the IPXDADDRESS parameter has been decreased from 10000000 to 00000001.

PCR: 03006

Module: SWI

Network affecting: No

An issue which sometimes resulted in a broadcast storm within the internal ports on the SwitchBlade, a reduction in bandwidth, and a loss of pinging has been resolved.

PCR: 3008

Module: SWI

Network affecting: No

An issue which caused pings to fail when a control card was inserted in the left hand slot to act as a slave, has been resolved.

PCR: 03014

Module: IPG, SWI

Network affecting: No

Support has been added to allow for multicasting to any number of overlapping VLANs up to the maximum number of multicast forwarding entries.

PCR: 03018

Module: SWI

Network affecting: No

An issue with pings failing after network host routes disappeared from the switch due to an IP hashing error has been resolved.

PCR: 03020

Module: SWI

Network affecting: No

An issue with an interrupt occuring when waiting on the MDIO which caused the MDIO to read or write incorrect information has been resolved.

PCR: 03021

Module: SWI

Network affecting: No

Ping would sometimes not work correctly after a 48 line card was extracted, and after a restart reboot. This issue has been resolved.

Availability

Patches can be downloaded from the Software Updates area of the Allied Telesyn web site at www.alliedtelesyn.co.nz/support/updates/patches.html. A licence or password is not required to use a patch.

Patch SB251-01 for Software Release 2.5.1 C613-10361-00 REV A

Page 3
Image 3
Allied Telesis SB251-01 manual Availability