Allied Telesis AR44x, x900-48, AR700, AR4155 manual Enabling and Installing this Release

				Enabling and Installing this Release		2
Models	Series	Release File	Date	Size (bytes)	GUI file
AT-8948, x900-48FE, x900-48FE-N	x900-48	89281-01.rez	26 July 2006	4786652	-
AT-9924T, AT-9924SP, AT-9924T/4SP	AT-9900	89281-01.rez	26 July 2006	4786652	9924_281-01_en_d.rsc
AT-9812T, AT-9816GB	AT-9800	sb281-01.rez	26 July 2006	3865056	9812_281-01_en_d.rsc
					9816_281-01_en_d.rsc

Caution: Using a maintenance version on the wrong model may cause unpredictable results, including disruption to the network.

This maintenance release note should be read in conjunction with the Release Note for Software Version 2.8.1.

Caution: Information in this release note is subject to change without notice and does not represent a commitment on the part of Allied Telesis Inc. While every effort has been made to ensure that the information contained within this document and the features and changes described are accurate, Allied Telesis Inc. can not accept any type of liability for errors in, or omissions arising from the use of this information.

Enabling and Installing this Release

To use this maintenance release you must have a base release license for Software Release 2.8.1. Contact your distributor or reseller for more information. To enable this release and install it as the preferred release, use the commands:

enable rel=xx281-01.rez num=2.8.1

set install=pref rel=xx281-01.rez

where xx is the prefix to the filename, as shown in the table on page 1. For example, to install the release on an AR440S router, use the commands:

enable rel=54281-01.rez num=2.8.1

set install=pref rel=54281-01.rez

Version 281-01

C613-10482-00 REV A