1 Select the radio band and tune in a desired radio station you wish to store in the preset memory.
2 Press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the station.
The selected station is stored.
The display shows the band, preset number and station frequency memorized.
•A total of 18 stations can be stored in the preset memory (6 stations for each band; FM1, FM2 and AM).
•If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station.
Presetting Stations Automatically1 Press BAND repeatedly until the desired radio band is displayed.
2 Press and hold TUNE/A.ME for at least 2 seconds.
The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into preset buttons 1 to 6 in order of signal strength.
When the automatic memory has been completed, the tuner goes to the station stored in preset location No.1.
•If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began.
Tuning to Preset Stations1 Press BAND repeatedly until the desired band is displayed.
2 Press any one of the station preset buttons
(1 through 6) that has your desired radio station in memory.
The display shows the band, preset number and frequency of the station selected.
8-EN
You can search for a radio station by its frequency.
1 Press and hold 
/ENT for at least 2 seconds in Radio mode to activate Frequency search mode.
2 Turn the Rotary encoder to select the desired frequency.
3* Press 
/ENT to receive the selected frequency.
* Operation is not required during HD Radio reception.
•Press 
/ESC in the search mode to cancel. Or, the search mode will be canceled if no operation is performed for 10 seconds.
Multicasting is the Ability to broadcast multiple program streams over a single FM frequency. This increases the amount and diversity of content choices. A maximum of eight multicast station channels can be selected on this unit.
When multicast station is received, the program number and the SPS indicator lights up. Press 
or 
to select the desired program service.
Receiving the Multicast Station Program Service.
BAND No.
Multicast No.
SPS indicator
F 1 - 3
9 0 . 3 M H z
Program Service example: |
| |
Multicast Radio Station | Program No. | Program Service |
90.3 MHz | No.1 | MPS: Main Program Service |
90.3 MHz | No.2 | SPS: |
90.3 MHz | No.3 | SPS: |
|
| |
|
| |
|
| |
|
| |
90.3 MHz | No.8 | SPS: |