SAT Radio Receiver (Optional)

SOURCE/ Rotary encoder

BAND //ENT /ESC

VIEW F/SETUP Preset buttons (1 through 6)

SAT Receiver: XM or SIRIUS Receiver

When an optional XM or SIRIUS Receiver Box is connected via the Ai-NET bus, the following operations may be performed. However, the XM Receiver and SIRIUS Receiver cannot be connected at the same time.

SIRIUS Receiver: Verify the features of the connected SIRIUS Receiver Box. Not all SIRIUS Receivers have identical functions and some may not be performed on this unit. For details about functions, refer to the SIRIUS Receiver’s Owner’s Manual.

Receiving Channels with the SAT Radio Receiver (Optional)

About SAT Radio

Satellite Radio* is the next generation of audio entertainment, with over 100 digital audio channels. For a small monthly fee, subscribers can hear crystal-clear music, sports, news and talk, coast-to-coast via satellite. For more information, visit XM’s website at www.xmradio.com, or SIRIUS’ website at www.sirius.com.

To receive SAT Radio, the separately sold XM Direct™ or SIRIUS Satellite Radio Tuner and an appropriate Ai-NET Interface Adapter will be required. For details, consult you nearest Alpine dealer.

*XM and its corresponding logos are trademarks of XM Satellite Radio Inc.

*SIRIUS and its corresponding logos are trademarks of SIRIUS Satellite Radio Inc.

•The SAT Receiver controls on this unit are operative only when a SAT Receiver is connected.

1 Press SOURCE/ to activate the SAT Radio mode.
2 Press BAND to select one of the three SAT Radio Preset Bands.

Each press changes the band:

XM mode:

X1X2X3X1

SIRIUS mode:

S1S2S3S1

3 Press or to select desired category.

4 Press

or

to select the desired channel.

Holding down

or

will change channels

continuously.

 

 

 

•When using the optional remote control (RUE-4190, etc.), an SAT Radio Channel can be directly called up with the numeric keypad of the remote control.

1While in XM or SIRIUS Radio mode, enter the Channel number you want to call up with the numeric keypad on the remote control.

2Press Enter on the remote control within 5 seconds to receive the Channel.

If the channel number is 3 digits, the Channel is automatically received after the channel number has been input.

Checking the SAT Radio ID Number

A unique Radio ID number is required to subscribe to SAT Radio programming. Each third party XM or SIRIUS radio comes with this number.

This number is an 8 character (for XM Radio) or 12 character (for SIRIUS Radio) alphanumeric number. It is printed on a label found on the SAT Receiver.

It can also be displayed on the screen of this unit in the following way.

XM:

 

1 While receiving a SAT Radio band, press

or

to select channel “0” for XM.

 

The unit displays “CH O” for 5 seconds, then alternately displays “RADIO ID” for 2 seconds and ID number for 10 seconds.

While displaying “RADIO ID” as shown above, Demonstration (page 17) become nonfunctional.

2 To cancel the ID number display, select the channel other than “0”.
SIRIUS:
1 While receiving a SAT Radio band, press or
to select channel “255” or “0” for SIRIUS.
2 Press VIEW until the ID No. appears in the display.

CHANNEL NO.CATEGORY NAMECHANNEL NAME ID NO.ID NO.COMPOSER NAMECLOCK CHANNEL NO.

3 To cancel the ID number display, set the channel to other than “255” and “0”.

•You cannot use “O”, “S”, “I”, or “F” for the ID Number (XM radio Receiver only).

•You can check the ID number printed on a label on your third party, SAT Radio Receiver package.

Storing Channel Presets
1 Press BAND to select the desired band you want to store.

2 After tuning in the desired channel, press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the channel.

The selected station is stored.

19-EN