External Device, 16-EN | Alpine CDE-125EBT specs

MP3

Playing MP3 Data (PLAY MODE)

CD-DA (Initial setting) / CDDA/MP3

This unit can play back CDs containing both CD and MP3 data (created in Enhanced CD (CD Extra) format). However, in some situations, playback of an enhanced CD may be difficult. In this case, you can select playback of a single session only, containing the CD data. When a disc contains both CD and MP3 data, playback starts from the CD data portion of the disc.

CD-DA: Only the CD data in Session 1 can be played back.

CDDA/MP3: CD data, MP3 files in mixed mode, and multi- session discs can be played back.

•Perform this setting before inserting a disc. If a disc has already been inserted, remove it first.

External Device

Connecting to an External Amplifier (POWER IC)

POW ON (Initial setting) / POW OFF

When an external amplifier is connected, sound quality can be improved by stopping the power supply of the built-in amplifier.

POW OFF: Use this mode when the line output of this unit is used to drive an external amplifier. In this setting, the head unit’s internal amplifier is turned OFF and cannot drive speakers.

Front

left

Amplifier

Front right

POW ON: The speakers are driven by the built-in amplifier.

Speakers

SPEAKER

RIGHT FRONTFront right

SPEAKER

RIGHT REARRear right

SPEAKER

LEFT REARRear left

SPEAKER

LEFT FRONTFront left

•No sound is produced by the system when the power output is set to OFF.

Setting the AUX+ SETUP Mode

AUX+ ON / AUX+ OFF (Initial setting)

An external device (such as a portable music player) can be connected to the Full Speed connector of this unit. A conversion cable (KCE-237B) for building up the AUX IN (optional) is required.

A portable music device and an iPod/iPhone cannot be connected to the Full Speed connector at the same time.

AUX+ ON: Set to ON when a portable device is connected. If SOURCE/ is pressed and AUX+ is selected, the sound of the portable device is input to the unit.

AUX+ OFF: Set to OFF when an iPod/iPhone is connected.

You can change the AUX+ name display when AUX+ SETUP is set to ON. Press / /ENT when AUX+ SETUP is set to ON, and select AUX+ NAME by turning the Rotary encoder, then press / /ENT. After that, turn the Rotary encoder to select the desired AUX+ name.