Installation and Connections

Before installing or connecting the unit, please read the following and pages 3 and 5 of this manual thoroughly for proper use.

Warning

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or product damage.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

Caution

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury.

If swallowed, consult a physician immediately.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR SHIFT LEVER.

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

Precautions

•Be sure to disconnect the cable from the (–) battery post before installing your CDE-9850Ri. This will reduce any chance of damage to the unit in case of a short-circuit.

•Be sure to connect the colour coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle's electrical system.

•When making connections to the vehicle's electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the CDE-9850Ri to the fuse box, make sure the fuse for the intended circuit of the CDE-9850Ri has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your Alpine dealer.

•The CDE-9850Ri uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized Alpine dealer for assistance.

•Be sure to connect the speaker (–) leads to the speaker (–) terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.

IMPORTANT

SERIAL NUMBER:

 

 

 

 

 

 

Please record the serial number of your unit in the space provided

INSTALLATION DATE:

 

 

 

 

 

below and keep it as a permanent record. The serial number or the

INSTALLATION TECHNICIAN:

 

 

engraved serial number is located on the bottom of the unit.

PLACE OF PURCHASE:

 

 

 

 

 

 

 

 

 

 

26-EN

Page 55 Page 57
Page 56
Image 56
Alpine CDE-9850Ri owner manual Installation and Connections
Page 55 Page 57

CDE-9850Ri specifications

The Alpine CDE-9850Ri is a high-performance car stereo that stands out for its blend of advanced features, modern technologies, and user-friendly interface. Designed with a focus on audio quality and user experience, this model is ideal for music enthusiasts looking to enhance their in-car listening experience.

At the heart of the CDE-9850Ri is its superior audio performance. The unit supports a wide range of audio formats, including MP3, WMA, and AAC, ensuring compatibility with various digital music libraries. The built-in amplifier delivers excellent power output, allowing for crystal-clear sound reproduction at any volume level. One of its standout features is the 3-band parametric equalizer, which provides users the ability to fine-tune audio settings according to their personal preferences and vehicle acoustics.

Connectivity is another area where the CDE-9850Ri excels. It features a USB port that allows users to connect and control their compatible devices seamlessly. Whether it's a smartphone or a portable music player, users can enjoy their music library with ease. Additionally, Bluetooth capability is included, enabling hands-free calling and wireless audio streaming. This feature not only enhances safety on the road but also adds convenience for users who wish to make calls without taking their hands off the wheel.

The CDE-9850Ri also incorporates an AM/FM tuner with 18 preset stations, giving users access to a wide array of radio content. Furthermore, with the ability to connect to satellite radio, listeners can enjoy even more channels and options for entertainment.

The user interface of the Alpine CDE-9850Ri is designed for simplicity and efficiency. The large display is easy to read, and the intuitive controls grant quick access to various functions. Additionally, the illuminated buttons allow for easy use, even in low-light conditions.

In terms of installation, the CDE-9850Ri is designed to fit into most standard car stereo systems, making it a versatile choice for a range of vehicles. Its sleek design not only looks good but also offers durability, ensuring that it stands the test of time.

In conclusion, the Alpine CDE-9850Ri is a sophisticated yet user-friendly car stereo system. With its superior sound quality, various connectivity options, and easy-to-use interface, it represents a significant upgrade for any vehicle. For those seeking a reliable and high-performing stereo system, the CDE-9850Ri checks all the essential boxes.
Top Page Image Contents