Alpine CDE-9881 owner manual Repeat Play, X. Random Play, Searching from CD Text

6After pressing (OPEN) to open the front panel,

press to eject the disc.

•Do not remove a CD during its eject cycle. Do not load more than one disc at a time. A malfunction may result from doing either.

•If the CD does not eject, press and hold for at least 2 seconds.

•The “DISC IN” indicator lights up when a disc is inserted.

•The CD-player can play discs containing audio data, MP3 data, WMA data and AAC data.

•“MP3”is displayed during MP3 playback.

•“WMA” is displayed during WMA playback.

•“AAC” is displayed during AAC playback.

•WMA format files that are protected by DRM (Digital Rights Management), AAC format files that have been purchased from iTunes Music Store and files that are copy-protected (copyright protection) cannot be played back on this unit.

•The track display for MP3/WMA/AAC data playback is the file numbers recorded on the disc.

•The playback time may not be correctly displayed when a VBR (Variable Bit Rate) recorded file is played back.

MP3/WMA/AAC Play Display

The folder number and file number will be displayed as described below.

Folder number File number

displaydisplay

•Press TITLE to switch the display. See “Displaying the Text” (page 14) for information about display switching.

Repeat Play

Press 4 to play back repeatedly the track being played.

The track (file) will be played repeatedly.

Press 4 again and select off to deactivate repeat play. CD mode :

: Only a track is repeatedly played back.

MP3/WMA/AAC mode :

: Only a file is repeatedly played back.

: Only files in a folder are repeatedly played back.

M.I.X. (Random Play)

Press 5 in the play or pause mode.

The tracks (files) on the disc will be played back in random sequence.

To cancel M.I.X. play, press 5 again.

CD mode :

: The tracks are played back in random sequence.

MP3/WMA/AAC mode :

: Only files in a folder are played back in random sequence.

: The files are played back in random sequence.

Searching from CD Text

Tracks can be searched and played by using the CD text on the disc. In the case of discs that do not support text, searches can be made by using the track numbers.

1Press /ESC during play. This will set the search mode.

2Turn the Rotary encoder to select the desired track, and then press / /ENT.

This will play the selected track.

•Press and hold /ESC for at least 2 seconds in the search mode to cancel. Or, the search mode is canceled if no operation is performed for 10 seconds.

•CD text search cannot be made during M.I.X. play.

9-EN