7.INSTALLATION

7.1Facsimile Receiver

The facsimile receiver may be mounted on the deck or a bulkhead. When selecting a mounting location, keep in mind the following points:

Locate the unit out of direct sunlight because of heat that can build up inside the cabinet.

Select a location where the connectors can be easily accessed.

Leave sufficient space around the unit for servicing and maintenance. See the outline drawing for recommended servicing space.

For mounting on a bulkhead, be sure the mounting location is strong enough to support the weight of the unit.

Locate the unit away from areas subject to water splash and rain.

A magnetic compass will be disturbed if the FAX-30 is placed too close to it. Separate the FAX-30 from a magnetic compass by the distances below to prevent interference to a magnetic compass.

Steering compass, 0.9 m, Standard compass, 0.6 m.

Fix the receiver to the mounting location with four 5 X 20 tapping screws (supplied).

210

150

300

285

Mounting dimensions of facsimile receiver FAX-30

7-1

offered by Busse-Yachtshop.com

Page 83
Image 83
Furuno manual Installation, Facsimile Receiver, Mounting dimensions of facsimile receiver FAX-30