Example of phasing signal out of synchronizatio | Furuno FAX-30

3. FAX OPERATION: PC

3.4.2Phasing signal out of synchronization

The SYNC soft key functions to fine tune the phasing signal. If the dead sector is plotted at an angle even when the phase is properly selected, adjust the synchronization to display the dead sector straightly.

Example of phasing signal out of synchronizatio

1.With a facsimile image displayed, click SYNC.

SYNC

0

OK

< back

Sync options

2.Enter a sync value that displays the dead sector straightly and then click OK. If the dead sectors appears as in the left-hand figure above, enter a larger value and for the right-hand figure, enter a smaller value. The setting range is –50 to +50.

3.Click OK and then “<back” or Back button to return to the top menu.

3.4.3Noise rejection

If noise speckles appear on the image, turn on the noise rejector as below to remove the noise.

1. With a facsimile image displayed, click NOISE REJECT.

NOISE REJECT

OFF

LOW

MEDIUM

HIGH

OK

< back

Noise rejector options

2.Click the noise rejection level desired and then click OK. HIGH provides the greatest degree of noise rejection.

3.Click OK and then “<back” or Back button to return to the top menu.

3-7

offered by Busse-Yachtshop.com

Image 49

Furuno FAX-30 manual Example of phasing signal out of synchronizatio, Sync options

Contents

Facsimile Receiver First E D I T I O N Safety Instructions Safety Instructions for the Installer Table of Contents Navtex Operation Navnet Appendix Foreword FeaturesWord to the Owner of the FAX-30 Vii Operational CharacteristicsGeneral NavNet Viii Network installation System ConfigurationNetwork installation Facsimile Receiver PC installation Standard supply Equipment ListsName Type Code No Qty Remarks Xii Optional supplyName Type Code No Remarks Overview, Setup NavNet OVERVIEW, SetupControls Controls Select sentence window Preparations for using the FAX-30 FAX-30, top view Accessing the FAX modeDisplay selection window Receive mode setup screen Choosing the receive modeRX mode options Standby display RX notice options Receive notification Accessing the FAX-30 top display Overview, Setup PCFacsimile receiver top display Standby displays Logging out RX Mode Automatic Receiving FAX Operation NavnetChoosing channel Thumbnails of received images Zone options Fax channel setup windowStation options Example stations of northwest pacific Frequency entry window Channel options Example JMH/Tokyo Stopping automatic receiving Previewing image being receivedFacsimile receiving display Manually starting receiving Manually Starting, Stopping ReceivingStart RX options Manually stopping receiving Wrong Speed or IOC and ImageWrong speed 60 chosen instead Wrong speed 120 chosen instead Setting timer receiving schedule Timer ReceivingTimer setup screen Timer schedule list Station options Example N Pacific W Part Timer schedule menu IOC options Channel options Example station JMHDrum speed options Start time entry window End time entry window Start timer optionsSave window Clearing all timer programs Turning on/off specific timer programsClear all options Facsimile image Displaying Facsimile Images Example of phase mismatching Phase mismatchPhase entry window Processing Facsimile Images Example of phasing signal out of synchronization Phasing signal out of synchronizationNoise rejection Sync entry window Image format Image colorColor options Reverse image options Zooming images Erasing Facsimile ImagesRotating images Erase image options Preventing Erasure of Facsimile Images FAX-30 top 2. Press the Edit WX FAX Station soft key Adding Facsimile ChannelsEdit facsimile station menu Station options Example stations of northwest pacific Frequency, call sign and station name entry windows FAX Operation PC Channel setup menuStarting receiving Stopping receiving Timer program list Setting, changing timer receiving schedule Timer program menu Timer Program No.2 Turning on/off specific timer programs Top Facsimile standby display Phase Sync options Example of phasing signal out of synchronizatio Color Saving images Lock options Lock Edit station list menu Edit Station List This page intentionally left blank About Navtex Messages Navtex Operation NavnetMessage categories Receiving navtex messages RX setup menu Setting Up Navtex Stations, Messages, AlarmsNavtex message data display Navtex frequency options Navtex station options Navtex station mode optionsNavtex message options Alarm SAR MSG options Max error rate entry windowAlarm warning msg options Navtex message selection screen Previewing Incoming Navtex MessagesNavtex message preview display Displaying navtex messages Displaying Navtex MessagesSample navtex message Remarks on navtex messages Nav areas for 490 kHz navtex stations Displaying the Navtex Station ListKHz stations of nav area Edit station menu Adding Navtex StationsEdit navtex station menu Nav area selection window Station ID1 entry window Station name entry windowLatitude entry window Navtex Operation PC RX Setup Setting Up Navtex Stations, Messages Received messages click to display Navtex standby display Navtex station list 490kHz Station List Edit station list Cullercoats Editing Navtex Stations Deleting Navtex Stations This page intentionally left blank Maintenance MAINTENANCE, TroubleshootingMaintenance points Check Point Action Troubleshooting Replacement of FuseTroubleshooting Trouble Problem Remedy System setup menu Diagnostics NavNetFAX-30 menu Diagnostic test results Diagnostics PC Clear memory menu Clearing Data NavNetClear all images options Clear memory options Clearing Data PC FAX-30, cover opened All Clear for technicians only Accessing the simulation mode through NavNet Simulation ModeSimulation setup menu SIMULATION§ Setup WX FAX §SIMULATION Live Navtex Simulation Accessing the simulation mode through PC This page intentionally left blank Mounting dimensions of facsimile receiver FAX-30 InstallationFacsimile Receiver Antenna wiring and preamp status Wire antenna or whip antennaAntenna Unit General antenna connection How to mount the preamp unit FAX-5 Installation of preamp unit FAX-5 option Wiring Wiring Ground wire Power cableWire or whip antenna Attachment of antenna connector JIS cable specifications Supplying Power to the Preamp UnitFAX-30, top view, cover removed Browser settings Browser, PC SettingsInternet Explorer Version Netscape Navigator Version FAX-30 PC settingsIP address Facsimile Stations AppendixFacsimile station map AP-1 Zone AP-2 Facsimile station list alphabetical order AP-3 Navtex stations map Navtex StationsAP-4 Location of navtex stations AP-5 Navtex stations list AP-6 VII AP-7 XII AP-8 NavNet menu tree Menu TreeAP-9 Soft keys Menu key AP-10 AP-11 PC Menu treeFacsimile menu tree Navtex menu tree AP-12 Specifications of Facsimile Receiver This page is intentionally left blank ＰａｃｋｉｎｇＬｉｓｔ FAX-30-J/E-AP FAX-30-J/E-N Offered by Busse-Yachtshop.com Offered by Busse-Yachtshop.com Offered by Busse-Yachtshop.com Offered by Busse-Yachtshop.com Offered by Busse-Yachtshop.com IN-1 Index Index IN-2 Offered by Busse-Yachtshop.com