Continued
How the Enhanced Other Networks function actually works:
CASE 1
If there is no station broadcasting the program you have selected
The unit continues tuning in the current station.
«
When a station starts broadcasting the program you have selected, the unit automatically switches to the station. The indication of received PTY code starts flashing.
«
When the program is over, the unit goes back to the previously tuned station, but the Enhanced Other Networks function still remains activated.
CASE 2
If there is a station broadcasting the program you have selected
The unit tunes in the program. The indication of received PTY code starts flashing.
«
When the program is over, the unit goes back to the previously tuned station, but the Enhanced Other Networks function still remains activated.
CASE 3
If the FM station you are listening to is broadcasting the program you have selected
The unit continues to receive the station but the indication of received PTY code starts flashing.
«
When the program is over, the indication of received PTY code stops flashing and remains lit, but the Enhanced Other Networks function still remains activated.
Alarm function
If an “Alarm!” (Emergency) signal is received from a station while listening to the radio, the unit automatically switches to the station broadcasting the “Alarm!” signal, except when you are listening to
Test function
The TEST signal is used for testing the “Alarm!” signal.
Therefore, it makes the unit work in the same way as the “Alarm!” signal does.
If a TEST signal is received from a station while listening to the radio, the unit automatically switches to the station broadcasting the TEST signal, except when you are listening to
More about the Enhanced Other Networks function
•This data sent from some stations may not be compatible with this unit. In this case, this function may not work correctly.
•While listening to a program tuned in by this function, the station does not change even if another network station starts broadcasting a program of the same data.
•This function is canceled when you change the source to CD, TAPE, or AUX, while it is temporarily canceled when you change the source to AM (MW/LW.)
•This function is also canceled when you turn off the unit.
