Listening to External Equipment
You can listen to external equipment such as an MD recorder.
•First make sure that the external equipment is properly connected as follows:
| LINE IN |
| (AUX) |
R | L |
SPEAKER IMPEDANCE | |
MIN 4 | |
R | L |
AC IN |
|
Analog audio |
|
equipment |
|
| To output |
1 Press AUX/MD. |
|
“AUX” appears on the display.
2 Adjust the volume level to the minimum position.
3 Start playing the external equipment.
•For operation of the external equipment, refer to its manual.
4 Press VOLUME + / – to adjust your desired listening level.
5 Apply sound effects, if you wish.
•Press AHB PRO if you want to reinforce the bass sound.
(See “Reinforcing the Bass sound” on page 12.)
•Press SOUND MODE if you want to control the tone.
(See “Selecting the Sound modes” on page 12.)
Recording from This Unit to External Equipment
You can record from this unit to external equipment connected to the OPTICAL DIGITAL OUT terminal of this unit, such as an MD recorder.
•The recording level is not affected by the VOLUME level and sound effect, either.
•First make sure that the external equipment is properly connected as follows:
OPTICAL DIGITAL OUT terminal
Protective cap
Before connecting the other equipment, remove the protective cap from the terminal.
Audio equipment with an optical digital input
1 Prepare for recording on the external equipment.
2 Start recording on the external equipment.
•For operation of the external equipment, refer to its manual.
3 Play the CD Player of this unit.
• For the CD operation, see page 20 to 24.
To check the clock time while listening to the external equipment
On the remote control ONLY:
Press DISPLAY (not on number buttons.)
•Each time you press the button, “AUX” and the clock time alternate on the display.
