JVC UX-A52R manual Connecting Other Equipment, To connect analog audio equipment

Connecting Other Equipment

You can connect both of the analog and digital equipment. When you connect and use the equipment, refer also to its manual supplied.

•DO NOT connect other equipment while the power is on.

•DO NOT plug in any equipment until all connections are complete.

To connect analog audio equipment

Be sure that the plugs of the audio cords and the jacks on the rear of the unit are color-coded: White plugs and jacks are for left audio signals, and red ones for right audio signals.

	LINE IN
	(AUX)
R	L
SPEAKER IMPEDANCE
MIN 4
R	L
AC IN
Analog audio
equipment
	To output

For playing the other equipment through this unit,

connect between the audio output jacks on the other equipment and the LINE IN (AUX) jacks by using an audio cord (not supplied.)

To connect audio equipment with an optical digital input terminal

You can record CD sound onto the connected digital equipment.

Connect an optical digital cord (not supplied) between the optical digital input terminal on the other equipment and the OPTICAL DIGITAL OUT terminal.

OPTICAL DIGITAL OUT	Protective cap
terminal

Before connecting the other equipment, remove the protective cap from the terminal.

Audio equipment with an optical digital input

NOW, you can plug the AC power cord.

IMPORTANT: Be sure to check all connections to be done before plugging the AC power cord into a wall outlet.

	SPEAKER IMPEDANCE
		MIN 4
	R	L
AC power cord
(supplied)
	AC IN
2	1 To the AC IN terminal
	To a wall outlet

When connecting the AC power cord into a wall outlet, the unit automatically starts the display illumination.

To stop and cancel the display demonstration, press

COLOR during display illumination—while the unit is turned off (on standby.)

To start the display illumination manually, press

COLOR again while the unit is turned off (on standby.)

– 9 –