Connecting Antennas
FM antenna
ANTENNA | FM antenna (supplied) | ||
AM | AM | EXT |
|
|
| ||
| LOOP |
| |
FM(75Ω) |
| ||
COAXIAL |
| ||
1Attach the FM antenna to the FM (75 Ω) COAXIAL terminal.
2Extend the FM antenna.
3Fasten it up in the position which gives you the best reception.
About the supplied FM antenna
The FM antenna supplied with this unit can be used as temporary measure. If reception is poor, you can connect an outdoor FM antenna.
To connect an outdoor FM antenna
Before connecting it, disconnect the supplied FM antenna.
Outdoor FM antenna (not supplied)
ANTENNA | ||
AM | AM | EXT |
| ||
| LOOP | |
FM(75Ω) | ||
COAXIAL | ||
A 75 Ω antenna with coaxial type connector (DIN 45325) should be used.
AM (MW/LW) antenna
1 | 2 |
| ||
ANTENNA | ||||
(not supplied) | ||||
| AM |
| ||
AM | EXT |
| ||
|
| |||
| LOOP |
| ||
FM(75Ω) |
| |||
COAXIAL |
| |||
|
| 3 |
| |
AM (MW/LW) loop |
| |||
antenna (supplied) |
| |||
1If cords are covered with insulation, twist the core of the cord at the end of each cord, then remove the insulation.
2Connect the AM (MW/LW) loop antenna to the AM LOOP terminals as illustrated.
3Turn the AM (MW/LW) loop antenna until you have the best reception.
To connect an outdoor AM (MW/LW) antenna
When reception is poor, connect a single
For better reception of both FM and AM (MW/LW)
•Make sure the antenna conductors do not touch any other terminals and connecting cords.
•Keep the antennas away from metallic parts of the unit, connecting cords, and the AC power cord.
