Furuno FAX-30 manual Channel options Example JMH/Tokyo, Frequency entry window

2. FAX OPERATION: NAVNET

8.Press the CHANNEL soft key to show the CHANNEL options. If you have chosen “0 JMH/TOKYO 1” at step 7, for example, the CHANNEL options are as below.

CHANNEL

▲°§

AUTO

0 03622.5 kHz

1 04902.0 kHz

2 07305.0 kHz

3 09970.0 kHz

4 13597.0 kHz

5 18220.0 kHz

6 23522.9 kHz

▼

Channel options (Example: JMH/Tokyo)

9.Rotate the [ENTER] knob to choose channel desired and press the ENTER soft key.

10.If necessary you may fine tune the frequency. Press the FREQ soft key.

FREQUENCY

03622.5 kHz

Frequency entry window

11.Use the alphanumeric keys or the [ENTER] knob to enter appropriate frequency and press the ENTER soft key. (You may choose the location where to enter data by operating the trackball.)

12.Press the RETURN soft key several times to return to the standby display.

Then, the FAX-30 will receive the next scheduled broadcast from the station selected. When the FAX-30 receives the start signal from the facsimile station it automatically adjusts itself to match speed, IOC (Index of Cooperation) and phase of the station’s transmitter. Facsimile images are received line by line, taking 30-40 minutes to receive depending on the size of the image and rotation speed of the drum at the facsimile transmitter. After a facsimile image is received it is compressed and stored in image memory and then posted on the “Thumbnails of received images” screen (see paragraph 2.4). This process takes from three to five minutes. You can see the image being received by pressing the WX FAX soft key on the fax standby display and then hitting the RCV WX FAX soft key.

2-3

offered by Busse-Yachtshop.com