Sound Setting

Rotary encoder (AUDIO/LOUD)

SOURCE/ BAND

/ESC A.SEL

Setting the Bass Control

You can change the Bass Frequency emphasis to create your own tonal preference.

1Press A.SEL repeatedly to select the BASS mode.

BASS TREBLE HPF BASS

Setting the Bass Center Frequency

2-1 Press BAND to select the desired bass center frequency.

80Hz 100Hz 200Hz 60Hz 80Hz

Emphasizes the displayed bass frequency ranges.

Adjusting Bass/Treble/Balance (Between

Left and Right)/Fader (Between Front

and Rear)/Defeat

1Press Rotary encoder (AUDIO) repeatedly to choose the desired mode.

Each press changes the mode as follows:

SUBW* BASS TREBLE BALANCE FADER DEFEAT VOLUME SUBW

Subwoofer : 0 ~ +15

Bass level: –7 ~ +7

Treble level: –7 ~ +7

Balance : L15 ~ R15

Fader : R15 ~ F15

Defeat : ON/OFF

Volume : 0 ~ 35

If no operation is performed for 5 seconds after selecting the SUBW, BASS, TREBLE, BALANCE, FADER or DEFEAT mode, the unit automatically returns to normal mode.

* When the subwoofer mode is set to OFF, its level cannot be adjusted.

2Turn the Rotary encoder until the desired sound is obtained in each mode.

By setting Defeat ON, previously adjusted settings of BASS and TREBLE will return to the factory defaults.

Setting the Bass Bandwidth

2-2 Press SOURCE/ to select the desired bass bandwidth.

Changes the boosted bass bandwidth to wide or narrow. A wider setting will boost a wide range of frequencies above and below the center frequency. A narrower setting will boost only frequencies near the center frequency.

Setting the Bass Level

2-3*1Turn the Rotary encoder to select the desired bass level (–7~+7).

You can emphasize or weaken the bass level.

3Press and hold /ESC for at least 2 seconds to return to normal mode.

If no operation is performed for 15 seconds, the unit will return to normal mode automatically.

The bass level settings will be individually memorized for each source (FM, AM, CD, etc.) until the setting is changed. The bass frequency and bass bandwidth settings adjusted for one source are effective for all other sources (FM, AM, CD etc.).

The function is inoperable when DEFEAT is set to ON.

*1 The adjustment can also be made by pressing Rotary encoder. Refer to “Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat” (page 12).

12-EN

Page 13
Image 13
Alpine CDE-9881 owner manual Sound Setting, Setting the Bass Control, Left and Right/Fader Between Front Rear/Defeat