8-EN
Radio Operation
Changing the Radio Frequencies
for each Country (CDM-9801 only)
For customers not living in North America, change the
radio frequencies as follows.
1 Press and hold the F/SETUP button for at least 3
seconds.
2 Choose the area mode by pressing the g or
f button.
3 Choose either A-1 or A-2 by pressing the BAND
button.
A-1: Radio frequencies for North America
A-2: Other Radio frequencies
NOTE
The stored radio stations will be cleared every time you
change the setting.
Manual Tuning
1Press the SOURCE/POWER button until a radio
frequency appears in the display.
2Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the band:
→ F1(FM1) → F2(FM2) → AM
3Press the TUNE/A.ME button repeatedly until
"DX SEEK" and "SEEK" disappear from the
display.
NOTE
The initial mode is DX SEEK.
4Press the g or f button to move downward
or upward one step respectively until the desired
station frequency is displayed.
NOTE
The ST indicator or STEREO indicator appears on the
display when a Stereo FM station is tuned in.
Automatic Seek Tuning
1Press the SOURCE/POWER button until a radio
frequency appears in the display.
2Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the band:
→ F1(FM1) → F2(FM2) → AM
3Press the TUNE/A.ME button to illuminate the
DX and SEEK indicators in the display.
With the DX (Distance) mode activated, both
strong and weak stations will be tuned in the
Auto-Seek operation.
Press again to return to the local mode. The DX
indicator will turn off and the SEEK indicator will
remain illuminated. Now, only strong stations will
be tuned.
4Press the g or f button to automatically
seek for a station downward or upward
respectively.
The unit will stop at the next station it finds.
Press the same button again to seek the next
station.
Manual Storing of Station Presets
1Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2Press and hold the Preset buttons (1 through
6) that you want to store the station on for at
least 2 seconds.
The selected station is stored. The display shows
the band, preset No. and station frequency
memorized.
3Repeat the procedure to store up to 5 other
stations onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the
procedure.
A total of 18 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2
and AM ).
NOTE
If you store a station in a preset memory which already
has a station, the current station will be cleared and
replaced with the new station.
Preset buttons (1 through 6)F/SETUP
g f
SOURCE/
POWER TUNE/A.ME BAND