Care and Maintenance
Factory reset the system
To troubleshoot problems, reset the System menu and ADAPTiQ® to the factory settings.
1.Press on the remote control.
2.Pressuntil 16 FACTORY RESET appears on the display.
3.Press 5.
The system resets.
4.Run the ADAPTiQ audio calibration (see page 20).
Reset a source button on the remote control
If you are experiencing problems with a source button on the remote control, reset the source button to the factory settings.
After performing this procedure, your source button is in CEC mode.
1.On the remote control, press and hold the appropriate source button until all six source buttons glow, then release.
Only the appropriate source button glows.
2.On the number keypad, enter 0140.
Service connectors on the Acoustimass® module
The Service and Data connectors are for service use only. Do not insert any cables into these connectors.
32 - English