Bose cinemate Source selection, Universal source buttons and console connectors, Using the System

Using the System

Source selection

You can switch between sources by pressing the appropriate source button on the remote control. Before you begin, program the remote to control your source (see page 24).

Select a source connected to the Bose® system

If your source is connected to the console and does not use CEC, follow this procedure to set the console to the appropriate mode and turn on the source.

1.Power on the system.

2.Press the button for the source you want to control. The source button glows.

3.Press .

The source powers on.

Select a source connected to your TV

If your source is connected to your TV, follow this procedure to select the appropriate TV input.

1.Power on the system, your TV and the appropriate source.

2.Press to select the correct input on your TV.

You may need to press several times to select the TV input for the source.

On some TVs, displays a menu. Use the remote control to choose the correct TV input and close this menu.

Universal source buttons and console connectors

The source buttons on your remote control correspond with the connectors on

the back of the console. For example, corresponds with the BD-DVDHDMI™ connector.

Your source buttons work with any source that is connected to the corresponding connector. If you have a secondary DVD or Blu-ray Disc™ player and connect it to

the CBL-SATconnector, it can be programmed to work with .

If you are using the optical, coaxial, or analog connectors, you must set the input for the appropriate source. You can access these settings using the System menu (see page 27).

English - 25