|
| Care and Maintenace | |
|
|
| |
Problem | What to do |
| |
|
| ||
Poor or | • Remove all protective films from the system. | ||
distorted | • Secure all cable connections on the soundbar, TV, and connected sources. | ||
sound | |||
• If you see the error message Cannot find Acoustimass: | |||
| |||
| |||
| |||
| cannot find the Acoustimass® module”). | ||
| • If using the analog or | connector, decrease the volume on your source. | |
| • Factory reset the system (see page 32) and run the ADAPTiQ® audio | ||
| calibration (see page 20). |
| |
|
| ||
Intermittent | • Secure all cable connections on the soundbar, TV, and connected sources. | ||
sound | • Move system away from potential interference, such as a wireless router, | ||
| |||
| cordless phone, television, microwave, etc. | ||
|
|
|
If your console cannot find the Acoustimass® module
The Acoustimass module and console are paired at the factory. However, if you see the error message Cannot find Acoustimass on the display, perform this pairing procedure:
1.Unplug the Acoustimass module.
2.Press on the remote control.
3.Press until 15 PAIR ACOUSTIMASS appears on the display.
4.Press .
Plug in Acoustimass appears on the display.
5.Plug the AC power cord into an AC (mains) outlet.
After the Acoustimass module connects to the console, Pairing complete appears on the display.
English - 31