Finishing Setup
Running the ADAPTiQ® audio calibration
The ADAPTiQ audio calibration customizes the sound of the system to the acoustics of your listening area by taking five audio measurements. To perform an audio calibration, you need 10 minutes when the room is quiet.
1.Put the ADAPTiQ headset on your head.
During the ADAPTiQ audio calibration, a microphone on the top of the headset measures the sound characteristics of your room to determine optimal sound quality.
2.Insert the ADAPTiQ headset cable into the 
connector on the console.
3.Press 
on the remote control.
4.Press 
until 14 ADAPTiQ appears on the display.
5.Press 
.
6.Follow the voice prompts until the system completes the process.
7.Unplug the ADAPTiQ headset from the console and store it in a safe place.
Note: If you move the system or any furniture, run ADAPTiQ again to ensure optimal sound quality.
20 - English
