Model
2. Mixdown
Mixdown is a technique that enables you to adjust the volume balance of the overdubbed tracks
Track 4 (Vocal)
Track 3 (Keyboard)
Track 2 (Electric bass)
Track 1 (Drum machine)
MIX LINE OUT
Master Recorder
4
4 | LINE OUT L, R jacks |
2
1
LINE IN L, R jacks
4
3
<CAUTION>
1
MINI component
stereo system
Be careful not to mistakenly press the [REC] button.
Remember that the recording track is always in the selected state.
1Insert a tape with tracks
up to the playback start point (reset the counter to "000").
2 3
3Set the master recorder to the record standby mode. (That is, press the [PAUSE] button so
that the level meter will respond, then set the recorder in record pause mode.)
2Connect the input jack of a master recorder, such as cassette deck, and the [LINE OUT
L, R] jacks.
Insert a recording tape (or MD) in the master recorder and locate the point on the tape at which you wish to start copying.
<NOTE>
The method for setting the recorder in record standby mode will vary depending on the recorder you are using.
Refer to the instruction manual of the master recorder for more information.
4Adjust the output level and balance (pan position) of tracks, then adjust input level
on the master recorder.
15