Automatic Memory of Station Presets
1 Press the SOURCE/POWER button to select the radio mode.
2 Press the BAND button repeatedly until the desired radio band is displayed.
3 Press and hold the TUNE/A. ME button for at least 2 seconds.
The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into presets 1 to 6 buttons in order of signal strength.
When the automatic memory has been completed, the tuner goes to the station stored in the preset location No. 1.
NOTE
If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began.
Tuning to Preset Stations
1 Press the SOURCE/POWER button to select the radio mode.
2 Press the BAND button repeatedly until the desired band is displayed.
3 Press the station Preset button that has your desired radio station in memory.
The display shows the band, preset number and frequency of the station selected.
