Extron electronic 48, MVX 88, MVX 44 manual Example 6 Save a preset, Preset Locations by Matrix Size

		INPUTS			OUTPUTS
1	2	3	4	1	2	3	4

MVX 44

Preset	1	2	3	4	5	6	7	8
			INPUTS					OUTPUTS
	1	2	3	4	1	2	3	4	5	6	7	8

MVX 48

Preset	1	2	3	4					5	6	7	8	9	10	11	12
					INPUTS					OUTPUTS
	1	2	3	4	5	6	7	8	1	2	3	4

MVX 84

Preset 1 2 3 4 5 6 7 8 9 10 11 12

				INPUTS
1	2	3	4	5	6	7	8
MVX 88

Preset 1 2 3 4 5 6 7 8

				OUTPUTS
1	2	3	4	5	6	7	8

9 12 11 12 13 14 15 16

Figure 11. Preset Locations by Matrix Size

Example 6: Save a preset

In the following an example, the current configuration is saved as a preset. The example shows the front panel indications that result from your actions.

1.Select Save Preset mode: Press and hold the Preset button for approximately

2 seconds until the Preset LED begins blinking.

Press and hold the button.

PRESET PRESET

2 seconds

The LED blinks to indicate Save Preset mode.

Release the Preset button.

All input and output buttons with assigned presets light. If you then save the configuration to a lit preset number, the configuration data at that preset location will be overwritten.

					INPUTS					OUTPUTS
	1	2	3	4	5	6	7	8	1	2	3	4
Preset:	1	2	3	4	5	6	7	8	9	10	11	12
		(Preset 2			(Preset 5				(Preset 9
		assigned)			unassigned)				assigned)

2.Select the preset: Press and release the input button or output button for the desired preset.

Press and release the Input 1 button to select preset 1.

1 2 3

Preset 2 Preset 3

All LEDs except the saved preset's LED go out.

INPUTS OUTPUTS

1 2 3 4 3 4 PRESET

The LED for the saved preset and the Preset LED remain lit for 1 second then go out.

MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Operation 21