Extron electronic MVX 88, MVX 44, MVX 84, 48 manual Example 7 Recall a preset

Example 7: Recall a preset

The following steps show an example in which a preset is recalled to become the current configuration. The example shows the front panel indications that result from your actions.

1.Select Recall Preset mode: Press and release the Preset button.

Press and release the button.

PRESET

The LED lights to indicate Recall Preset mode.

All input and output buttons with assigned presets light. If you then recall the configuration from an unlit preset number, all ties will be cleared.

			INPUTS			OUTPUTS
	1	2	3	4	1	2	3	4
Preset:	1	2	3	4	5	6	7	8

2.Select the preset: Press and release the input button or output button for the desired

preset.

Press and release the Input 1 button to select preset 1.

1 2 3

Preset 2 Preset 3

All LEDs except the recalled preset's LED go out.

INPUTS

1 2 3 3 4 PRESET

The LED for the recalled preset and the Preset LED remain lit for 1 second then go out.

MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Operation 22