Extron electronic MVX 44, MVX 88 Symbol definitions, Command and Response Table for SIS Commands

Symbol definitions

]= Carriage return/line feed } = Carriage return (no line feed)

• = space E = Escape key

X!	=	Input number (for tie)	0	(untie) – maximum number of inputs
X@	=	Output number	1 through 4 (MVX 44, MVX 84) or 1 through 8 (MVX 48, MVX 88)
X#	=	Executive mode, mute	1	= on	0 = off
X$	=	Input number	1 through 4 (MVX 44, MVX 48) or 1 through 8 (MVX 84, MVX 88)
X%	=	Input audio gain	0 through 10 (1 dB per step)
X^	=	Numeric dB value	–18 to +10 (29 steps [dB] of audio attenuation and gain)
X&	=	Input audio attenuation	1 through 18 (1 dB per step)
X*	=	Output gain	0	= consumer level (–10 dBV)		1	= pro level (+4 dBu)
X(	=	Preset number	00 through 16 (00 = current configuration)
X1) =		Video/audio mute	0	= no mutes		2	= audio mute
			1	= video mute		3	= video and audio mute
X1! =		RGB delay in ½ second increments (10 [5 seconds] maximum)
X1@ =		Controller firmware version number to second decimal place

Command and Response Table for SIS Commands

Command Function	ASCII Command	Response	Additional description
	(Host to Unit)	(Unit to Host)
Create Ties

NOTES: • The & tie command for RGB and the % tie command for video can be used interchangeably.

• The & read tie command for RGB and the % read tie command for video can be used interchangeably.

• Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&003*003%4*4$.

• The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.

• The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1, 02*02, or 001*001).

Tie input X! to output X@, RGB video	X!*X@!	OutX@•InX!•All]	Tie the input X! video and audio to
and audio			output X@.
Example:	1*3!	Out3•In1•All]	Tie input 1 video and audio to output 3.
Tie input X! to output X@, RGB	X!*X@&	OutX@•InX!•RGB]	Audio breakaway (video only) tie.
(video) only
Example (see the 1st bulleted	7*5&	Out5•In7•RGB]	Tie input 7 RGB to output 5.
note, above):
Tie input X! to output X@, video only	X!*X@%	OutX@•InX!•RGB]	Audio breakaway (video only) tie.
Tie input X! to output X@, audio only	X!*X@$	OutX@•InX!•Aud]	Audio breakaway (audio only) tie.
Example:	3*8$	Out8•In3•Aud]	Tie input 3 audio to output 8.
Quick multiple tie	E+QX!*X@!...X!*X@$}	Qik]	Make multiple ties.
Example:	E+Q3*4!3*5%3*6$}	Qik]	Tie input 3 video and audio to output 4,
			tie input 3 video to output 5, and tie
			input 3 audio to output 6.

Tie input to all outputs, RGB video and audio

Example:

Tie input to all outputs, RGB (video) only

Tie input to all outputs, video only Tie input to all outputs, audio only Read RGB (video) output tie Read RGB (video) output tie Read audio output tie

X!*!	InX!•All]
5*!	In05•All]
X!*&	InX!•RGB]
X!*%	InX!•RGB]
X!*$	InX!•Aud]
X@&	X!]
X@%	X!]
X@$	X!]

Tie input 5 video and audio to all outputs. Audio breakaway (video only) tie.

Audio breakaway (video only) tie. Audio breakaway (audio only) tie. RGB input X! is tied to output X@. RGB input X! is tied to output X@.

Audio input X! is tied to output X@.

MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Remote Operation 39