Extron electronic 48, MVX 88, MVX 44, MVX 84 Tools menu, RGB Delay/Mute/Output-Volume Adjust Window

Restore Last-Session’s settings — Loads the icons and icon captions that were saved during the last session. If you saved the changes of the previous session to disk the last time you exited the program, the ties from that session are also loaded.

Select Printer ... — Selects the target printer.

Print Tie Map — Prints the tie set that is displayed on the screen.

Exit — Closes the Extron Matrix Switchers Control Program.

Tools menu

Assign Device Icons — Displays the complete set of input and output device icons. You can drag any of these icons to the input and output boxes.

Edit Device Palette — Allows you to add your own device icon graphics.

RGB Delay settings — Displays the RGB Delay/Mute/Output- Volume Adjust window (see figure 35), which shows the RGB delay setting for each output and allows you to change it. This window also allows you to mute and unmute the video and audio output and displays the output volume level and allows you to change it.

Figure 35. RGB Delay/Mute/Output-Volume Adjust Window

Audio-Input-Gain settings — Displays the Configure Audio Options window (see figure 36), which shows the audio gain level settings for each input and allows you to change them.

Figure 36. Configure Audio Options Window

MVX 44 / 48 / 84 / 88 VGA Matrix Switchers • Remote Operation 53